Purchase MPower Tuning - Euro Power Motorsports

Product categories

Showing all 3 results

BMW E39 M5 Tune (S62) – Infinity Design

Rated 5.00 out of 5

Models

Fuel – Selectable fuel octane rating (91, 93)
Rear O2 Sensor Delete - If you are running aftermarket headers please select O2 Sensor delete. We will remove all coding associated with rear O2 sensors
SAP (Secondary Air Pump) Delete - If you have deleted your Secondary Air Pump, please select this option and we will remove the coding from the DME/ECU to avoid a CEL
Cold Start Delete - All E39 M5's have a cold start calibration to heat up the catalytic converters. If you're unhappy with the way your M5 idles/runs while cold, select this option and we will adjust the cold start in your tune. Highly advised if you are running a catless exhaust system

BMW E6X M5/M6 Tune (S85) – Infinity Design

Rated 5.00 out of 5

Models

Speed Limiter Removal: The factory DME limits the vehicle to 155 MPH via internal software. This option removes the limiters to allow exploring the upper end of what these vehicles are capable of.
SMG Shifting Improvements: One of the most well-reviewed options we offer is the modification to the shifting characteristics of the SMG. Improved shift speed and smoothness at all RPM and load combinations.
O2 Readiness Override (For off-road use only): One of the largest restrictions in the S85's airflow path is the close-coupled catalytic converters located in the headers. Many aftermarket off-road use headers to remove the primary cats or replace them with high-flow race cats to allow the engine to breathe better. This results in a "Service Engine Soon" light illuminated on the instrument cluster as the DME stores a code for "Catalytic Converter Efficiency" due to the increased oxygen present at the post-cat O2 sensors. This option removes the SES light generated by this condition to allow for other more significant error codes to alert the driver when something is wrong.
RPM Limiter Raised: Standard option is for 8500 RPM.
VANOS Adjustment Improvement: The factory calibrations reduce the maximum speed at which the VANOS system is allowed to change timing in certain areas. This is done to reduce edginess in response at midrange load and speeds but results in some hesitation during rapid throttle application.
Cold Start Delete: This option removes the catalytic converter heating routine which was implemented on most modern vehicles for the purpose of meeting ULEV and SULEV emissions certifications in the US.

BMW E9X M3 Tune (S65) – Infinity Design

Rated 5.00 out of 5

Models

Raised RPM Limit to 8600rpm
Top Speed Limit Removal
Cold Start Delete (CAT Warm up Delete)
Servotronic
Power Calibrations with changes made to ignition, fuel, torque and vanos maps
Stage 3 Calibration available for cars with long tube headers and running CATless
Custom Tuning for cars with superchargers, camshafts and cylinder head modifications (please enquire for price)